cabinet locks.

Replies to This Discussion

Permalink Reply by John Robinson on September 5, 2009 at 1:27pm

Fraser, check out www.woodworkershardware.com I'm not sure what type lock your looking for but I see several for 1 1/8" material good luck, John

▶ Reply to This

Permalink Reply by SHELLIE BREWER on September 9, 2009 at 9:08am

I USE NATIONAL BRAND CAM LOCKS. THE #C8055-415-14A IS SUITABLE FOR YOUR APPLICATION. YOU CAN
SCOTCH-BRITE THE FINISH TO GET A SATIN FINISH.

▶ Reply to This

Permalink Reply by Mike Imperatore on December 9, 2009 at 7:50am

Fraser,

Check out Hafele's lock - 235.09.000. It can handle material from 7/8" to 1 3/8" by turning the mounting flange. It also comes with 2 different cams for various applications. Hope this helps. www.hafele.com/us


Good Luck,
- Mike

Attachments:

• Doc2.doc, 76 KB

▶ Reply to This